An whole-house air purifier removes pollutants from the breathable indoor air, however these pollutants can cause serious complications to a single’s health, however sometimes these whole-house air purifiers may stop toiling, and here are troubleshooting ideas you can use to get your whole-house air purifier toiling again! When the Heating, Ventilation, plus A/C component does not turn on, check if its power cord is plugged into a socket; If not, plug it in the common power outlet plus turn it on. If it does not turn on the concern could be a faulty power outlet. Have it updated plus turn the purifier on! Do not use the purifier if its power cord is injured. Instead, contact the brand’s shopper care service. If your whole-house air purifier does not respond to touch control or push buttons, the possible cause could be an unplugged purifier or uncovered filter. To repair this, you should plug your purifier into a power outlet! Place the filter cover back officially according to the manufacturer’s manual. If you identify the concern as malfunctioned controls, detach the purifier from the power source plus contact the brand’s shopper care service! An whole-house air purifier could stop functioning well due to dust build-up in the air filters, big room coverage, objects blocking the air intake plus outlet, or a purifier sited too close to the corner. It could also be due to dust build-up on the filters. Wash your air filter in the laundry unit to get rid of dust. Avoid placing an whole-house air purifier in a corner; Unproper noises from the whole-house air purifier could possibly mean that the air filter is not closed officially or that you need to update your air filter. A pop sound could mean moisture in the air is high plus condense on electrodes to short circuit the system. Unplug the unit plus disinfect the electrodes with a dry rag. If the noise continues after you have changed your air filter, then the concern is inside the purifier. Switch it off, detach from the power source plus contact your Heating, Ventilation, plus A/C brand shopper service. If you notice a reduced airflow from the purifier, check the fan speed, adjust your fan speed, or set it on auto mode. Auto Mode detects pollutants plus removes them by changing fan speed! Finally, change the whole-house air purifier’s location if the airflow is low.